Automatic Battery Charger (Digital) > Specification: Automatic Battery Charger (Digital) Brand : MICRO Model : As per requirement Capacity : As per requirement Rating : Continuous Cooling : Natural or forced convention Control : SCR Based

Specification:

Automatic Battery Charger (Digital)
Brand : MICRO
Model : As per requirement
Capacity : As per requirement
Rating : Continuous
Cooling : Natural or forced convention
Control : SCR Based
DC Output
Direct Feed Voltage : 36V DC
Float Charge voltage : 2.35VDC Per Cell (Adj.)
Boost charge voltage : 2.45VDC Per Cell (adj.)
Voltage stability : Within 1% (when input voltage, frequency &
load are varied 10%, 5%, 1%
Rated Current : 40A
Current Limitation : 110%
Charging Characterising : Constant voltage / current
Line/Load Regulation : 1%
Power walk in time : Soft, less than 10 sec. (Min.)
Protection:
Capable of with standing power line surge and transients.
Over voltage trip : At 120% of rated phase voltage
Under voltage trip : At 80% of rated phase voltage
Over load protection by current limit.
Battery reverse polarity protected.
Output protected by HRC fuse
Control & Monitoring Equipment:
DC voltmeter as standard feature.
DC ammeter as standard feature.
AC voltmeter as standard feature.
Charging current limit potentiometer (inside the panel)
Over voltage setting potentiometer (inside the panel)
Under voltage setting potentiometer (inside the panel)
Display Of Battery Charge Operation:
Boost Charge (LED indication Red).
Float Charge (LED indication Green).
DC ON (Led indication Green).
Power ON (LED indication).
 


 
     
Copyright©MICRO ELECTRONICS LTD.
Designed & Developed by DesignDesk